This project has moved and is read-only. For the latest updates, please go here.

Measurement.Adder is lost when using UnSynchronizedSubscribe

Jun 28, 2011 at 10:02 PM

When an Adder is set for a measurement, SynchronizedSubscribe seems to send the right Adder and hence the right AdjustedValue to the clients, where as UnSynchronizedSubscribe sends Adder = 0.00 and hence the AdjustedValue is same as the the original value of measurement. Is this by design?

This can be seen by adding an adder value to one of the measurements from openPDC manager and looking at the measurement in "Input Status & Monitoring" window, the chart and the measurement values below the chart are adjusted values after adding the adder, where as the tree on the left shows the measurement value with adder 0.00. I guess the same behavior would be seen with multiplier as well.

Thanks!

Jun 29, 2011 at 2:29 PM

You're handy to have around - thanks for the catch - we'll check in a fix for this!

Ritchie

Jun 29, 2011 at 2:30 PM
This discussion has been copied to a work item. Click here to go to the work item and continue the discussion.